Assemble Computer Desk How To Assemble A Desk Top Computer (answer In Detail)?
How to assemble a desk top computer (answer in detail)? - assemble computer desk
Well, I could put into words, put step by step but I think that by clicking on this link http://www.corsairmemory.com/systembuild ...
You can understand better, it will show how to build a PC step by step with pictures in high resolution. from beginning to end
|
6 comments:
Preparation:
Materials needed:
Strap or standing in a static bag (supplied with the motherboard), CPU thermal paste (if not already in the CPU cooler), a screwdriver.
The construction of the PC:
1. separate the two sides of the computer in
2. Install the adapter into the housing and screw next to the addition of hard drives and DVD players
3. Installing the CPU, RAM and CPU coolers on the motherboard (the circumstances of the case)
4. Screws on the plate separators motherboard in the case
5. Screw the motherboard, the spacers
6. You can install (the heat sink, the scariest part)
7. Install the video card, sound card
8. all the power connections on the rails. Do not forget a single channel (cable) for data elements such as hard drives, DVD drives and graphics cards to use
9. Connect the power supply fan and do not forget to connect the CPU fan power connector on the motherboard.
10. Restart the computer, the BIOS will change the settings, and requires, as (you must use the values of research, forPart of the l., Eg-voltage processor, etc.)
11. Installing the operating system of your choice, install the drivers, and you're good to go.
Preparation:
Materials needed:
Strap or standing in a static bag (supplied with the motherboard), CPU thermal paste (if not already in the CPU cooler), a screwdriver.
The construction of the PC:
1. separate the two sides of the computer in
2. Install the adapter into the housing and screw next to the addition of hard drives and DVD players
3. Installing the CPU, RAM and CPU coolers on the motherboard (the circumstances of the case)
4. Screws on the plate separators motherboard in the case
5. Screw the motherboard, the spacers
6. You can install (the heat sink, the scariest part)
7. Install the video card, sound card
8. all the power connections on the rails. Do not forget a single channel (cable) for data elements such as hard drives, DVD drives and graphics cards to use
9. Connect the power supply fan and do not forget to connect the CPU fan power connector on the motherboard.
10. Restart the computer, the BIOS will change the settings, and requires, as (you must use the values of research, forPart of the l., Eg-voltage processor, etc.)
11. Installing the operating system of your choice, install the drivers, and you're good to go.
Well done, the best way, if you are a beginner, is to ensure that you understand that the enemy is static. Make sure to have either a static strap, or that you constantly wear on the field. The book, which usually comes with the motherboard does not run through step by step. Just be careful with your head and not too fast. It would be very complicated, will try it step by step, I do not know what you have or what you need online.
Put static belts and get into a comfortable work area .. and read the case and motherboard manuals!
1. Make sure that all parts
2. Implementation of case fans.
3. Replace CPU
4. Join HSF ... Use Arctic Silver 5 Fat
5. Set the optical drive (s)
6. Bring Mobo
7. Connect the power cord
8. Insert the disk
9. Turn on the video card (s)
10. Turn on the sound card
11. Connect the other cable and SATA cable.
12. Case closed
13. Attach monitor, speakers, keyboard, mouse and power cord
14. Turn and pray that all positions
15. If successful, established operating system and drivers
For the material in general.
Now if only someone could explain why all this is true for the development of the tsunami disaster? I've never been so frustrated.
Put static belts and get into a comfortable work area .. and read the case and motherboard manuals!
1. Make sure that all parts
2. Implementation of case fans.
3. Replace CPU
4. Join HSF ... Use Arctic Silver 5 Fat
5. Set the optical drive (s)
6. Bring Mobo
7. Connect the power cord
8. Insert the disk
9. Turn on the video card (s)
10. Turn on the sound card
11. Connect the other cable and SATA cable.
12. Case closed
13. Attach monitor, speakers, keyboard, mouse and power cord
14. Turn and pray that all positions
15. If successful, established operating system and drivers
For the material in general.
Now if only someone could explain why all this is true for the development of the tsunami disaster? I've never been so frustrated.
Put static belts and get into a comfortable work area .. and read the case and motherboard manuals!
1. Make sure that all parts
2. Implementation of case fans.
3. Replace CPU
4. Join HSF ... Use Arctic Silver 5 Fat
5. Set the optical drive (s)
6. Bring Mobo
7. Connect the power cord
8. Insert the disk
9. Turn on the video card (s)
10. Turn on the sound card
11. Connect the other cable and SATA cable.
12. Case closed
13. Attach monitor, speakers, keyboard, mouse and power cord
14. Turn and pray that all positions
15. If successful, established operating system and drivers
For the material in general.
Now if only someone could explain why all this is true for the development of the tsunami disaster? I've never been so frustrated.
Post a Comment